MET currently has OSHA approval to test and certify to over 180 product categories. The table below details the standards that apply.
Programs: | |
2. Acceptance of testing data from independent organizations, other than NRTLs. | |
3. Acceptance of product evaluations from independent organizations, other than NRTLs. | |
4. Acceptance of witnessed testing data. | |
5. Acceptance of testing data from non-independent organizations. | |
6. Acceptance of evaluation data from non-independent organizations (requiring NRTL review prior to marketing). | |
7. Acceptance of continued certification following minor modifications by the client. | |
8. Acceptance of product evaluations from organizations that function as part of the International Electrotechnical Commission Certification Body (IEC-CB) Scheme. | |
9. Acceptance of services other than testing or evaluation performed by subcontractors or agents. | |
Product Standards: | |
ANSI A17.5 | Elevator and Escalator Electrical Equipment |
ANSI C12.1 | Code for Electricity Meters |
ANSI/IEEE C57.13 | Terminology and Test Code for Instrument Transformers |
ANSI/UL 5 | Surface Metal Raceways and Fittings |
UL 5A | Nonmettalic Surface Raceways and Fittings |
ANSI/ISA 12.12.01 | Nonincendive Electrical Equipment for Use in Class I & II, Division 2 & Class III, Divisions I & 2 Hazardous |
ANSI/UL 22 | Electric Amusement Machines |
UL 45 | Portable Electric Tools |
UL 48 | Electric Signs |
ANSI/UL 50 | Enclosures for Electrical Equipment |
ANSI/UL 65 | Electric Wired Cabinets |
ANSI/UL 73 | Electric Motor-Operated Appliances |
UL 82 | Electric Gardening Appliances |
ANSI/UL 122 | Electric Photographic Equipment |
ANSI/UL 130 | Electric Heating Pads |
ANSI/UL 153 | Portable Electric Lamps |
UL 183 | Manufactured Wiring Systems |
ANSI/UL 187 | X-Ray Equipment |
ANSI/UL 197 | Commercial Electric Cooking Appliances |
ANSI/UL 201 | Garage Equipment |
ANSI/UL 231 | Electrical Power Outlets |
UL 234 | Low Voltage Lighting Fixtures for Use in Recreational Vehicles |
UL 244A | Solid State Controls for Appliances |
UL 250 | Household Refrigerators and Freezers |
UL 291 | Automated Teller Systems |
UL 294 | Access Control System Units |
UL 325 | Door, Drapery, Gate, Louver and Window Operator and Systems |
UL 355 | Cord Reels |
UL 399 | Drinking Water Coolers |
UL 412 | Refrigeration Unit Coolers |
UL 416 | Refrigerated Medical Equipment |
UL 427 | Refrigerating Units |
UL 430 | Waste Disposers |
UL 458 | Power Converters/Inverters and Power Converter/Inverter Systems for Land Vehicles and Marine Crafts |
UL 466 | Electric Scales |
ANSI/UL 469 | Musical Instruments and Accessories |
ANSI/UL 471 | Commercial Refrigerators and Freezers |
UL 474 | Dehumidifiers |
ANSI/UL 482 | Portable Sun/Heat Lamps |
ANSI/UL 484 | Room Air Conditioners |
ANSI/UL 498A | Current Taps and Adapters |
ANSI/UL 499 | Electric Heating Appliances |
UL 506 | Specialty Transformers |
ANSI/UL 507 | Electric Fans |
ANSI/UL 508 | Electric Industrial Control Equipment |
UL 508A | Industrial Control Panels |
UL 508C | Power Conversion Equipment |
ANSI/UL 514A | Metallic Outlet Boxes, Electrical |
UL 541 | Refrigerated Vending Machines |
UL 544 | Electric Medical and Dental Equipment |
UL 561 | Floor-Finishing Machines |
UL 563 | Ice Makers |
UL 588 | Seasonal and Holiday Decorative Products |
UL 664 | Commercial Dry-Cleaning Machines (Type IV) |
ANSI/UL 676 | Underwater Lighting Fixtures |
ANSI/UL 705 | Power Ventilators |
UL 745-1 | Portable Electric Tools |
UL 745-2-1 | Particular Requirements of Drills |
UL 745-2-3 | Particular Requirements for Grinders, Polishers, and Disk-Type Sanders |
UL 745-2-5 | Particular Requirements for Circular Saws and Circular Knives |
UL 745-2-14 | Particular Requirements for Planers |
UL 745-2-17 | Particular Requirements for Routers and Trimmers |
UL 745-2-31 | Particular Requirements for Diamond Core Drills |
UL 745-2-32 | Particular Requirements for Magnetic Drill Presses |
UL 745-2-35 | Particular Requirements for Drain Cleaners |
UL 745-2-36 | Particular Requirements for Hand Motor Tools |
UL 745-2-37 | Particular Requirements for Plate Jointers |
UL 749 | Household Dishwashers |
ANSI/UL 751 | Vending Machines |
UL 756 | Coin and Currency Changers and Actuaters |
UL 763 | Motor-Operated Commercial Food Preparing Machines |
UL 775 | Graphic Arts Equipment |
UL 778 | Motor-Operated Water Pumps |
ANSI/UL 813 | Commercial Audio Equipment |
UL 826 | Household Electric Clocks |
UL 858 | Household Electric Ranges |
ANSI/UL 859 | Personal Grooming Appliances |
UL 867 | Electrostatic Air Cleaners |
UL 869A | Standard for Service Equipment |
ANSI/UL 913 | Intrinsically Safe Apparatus and Associated apparatus for Use in Class I, II, and III, Division 1, Hazardous Locations |
UL 916 | Energy Management Equipment |
UL 917 | Clock-Operated Switches |
ANSI/UL 923 | Microwave Cooking Appliances |
UL 924 | Emergency Lighting and Power Equipment |
UL 935 | Fluorescent-Lamp Ballasts |
UL 961 | Electric Hobby and Sports Equipment |
UL 963 | Sealing, Wrapping, and Marking Equipment |
ANSI/UL 982 | Motor-Operated Household Food Preparing Machines |
UL 983 | Surveillance Cameras Units |
UL 987 | Stationary and Fixed Electric Tools |
UL 998 | Humidifiers |
UL 1008 | Transfer Switch |
ANSI/UL 1012 | Power Supplies |
ANSI/UL 1017 | Vacuum Cleaning Machines and Blower Cleaners |
ANSI/UL 1018 | Electric Aquarium Equipment |
UL 1026 | Electric Household Cooking and Food Serving Appliances |
UL 1028 | Hair Clipping and Shaving Appliances |
ANSI/UL 1042 | Electric Baseboard Heating Equipment |
ANSI/UL 1054 | Special-Use Switches |
ANSI/UL 1069 | Hospital Signaling and Nurse-Call System |
UL 1081 | Swimming Pool Pumps, Filters and Chlorinators |
UL 1082 | Household Electric Coffee Makers and Brewing-Type Appliances |
UL 1083 | Household Electric Skillets and Frying-Type Appliances |
UL 1086 | Household Trash Compactors |
UL 1090 | Electric Snow Movers |
ANSI/UL 1203* | Explosion-Proof and Dust-Ignition-Proof Electrical Equipment for Use in Hazardous (Classified) Locations |
ANSI/UL 1230 | Amateur Movie Lights |
UL 1236 | Battery Chargers for Charging Engine-Starter Batteries |
UL 1244 | Electrical and Electronic Measuring and Testing Equipment |
UL 1248 | Engine-Generator Assemblies for Use in Recreational Vehicles |
UL 1261 | Electric Water Heaters for Pools and Tubs |
UL 1278 | Movable and Wall or Ceiling Hung Electric Room Heaters |
ANSI/UL 1310 | Direct Plug-In Transformer Units |
UL 1363 | Relocatable Power Taps |
ANSI/UL 1411 | Transformers and Motor Transformers for Use in Audio-, Radio-, and Television-Type Appliances |
UL 1419 | Professional Video and Audio Equipment |
UL 1431 | Personal Hygiene and Health Care Appliances |
UL 1433 | Control Centers for Changing Message Type Electric Signs |
UL 1447 | Electric Lawn Mowers |
UL 1448 | Electric Hedge Trimmers |
UL 1449 | Transient Voltage Surge Suppressors |
UL 1450 | Motor-Operated Air Compressors, Vacuum Pumps and Painting Equipment |
UL 1492 | Audio-Video Products and Accessories |
UL 1559 | Insect-Control Equipment – Electrocution Type |
UL 1563 | Electric Spas, Equipment Assemblies, and Associated Equipment |
UL 1564 | Industrial Battery Chargers |
ANSI/UL 1573 | Stage and Studio Lighting Units |
UL 1574 | Track Lighting Systems |
UL 1594 | Sewing and Cutting Machines |
UL 1598 | Luminaries |
ANSI/UL 1638 | Visual Signaling Appliances–Private Mode Emergency and General Utility Signaling |
UL 1640 | Portable Power-Distribution Equipment |
ANSI/UL 1647 | Motor-Operated Massage and Exercise Machines |
UL 1662 | Electric Chain Saws |
UL 1727 | Commercial Electric Personal Grooming Appliances |
UL 1740 | Industrial Robots and Robotic Equipment |
UL 1741 | Inverters, Converters, Controllers and Interconnection System Equipment for Use With Distributed Energy Resources |
UL 1776 | High-Pressure Cleaning Machines |
UL 1778 | Uninterruptible Power Supply Equipment |
UL 1786 | Nightlights |
UL 1795* | Hydromassage Bathtubs |
UL 1838 | Low Voltage Landscape Lighting Systems |
UL 1863 | Communication Circuit Accessories |
UL 1951 | Electric Plumbing Accessories |
UL 1993 | Self-Ballasted Lamps and Lamp Adapters |
UL 1994 | Luminous Egress Path Marking Systems |
UL 1995 | Heating and Cooling Equipment |
UL 1996 | Electric Duct Heater |
UL 2021 | Fixed and Location Dedicated Electric Room Heaters |
UL 2044 | Commercial Closed Circuit Television Equipment |
UL 2089 | Vehicle Battery Adapters |
UL 2157 | Electric Clothes Washing Machines and Extractors |
UL 2158 | Electric Clothes Dryers |
UL 2161 | Neon Transformers and Power Supplies |
UL 5085-1 | Low Voltage Transformers–Part 1: General Requirements |
UL 5085-3 | Low Voltage Transformers–Part 3: Class 2 and Class 3 Transformers |
UL 6500 | Audio/Visual and Musical Instrument Apparatus for Household, Commercial, and Similar General Use |
UL 60065 | Audio, Video and Similar Electronic Apparatus |
UL 60335-1 | Safety of Household and Similar Electrical Appliances, Part 1, General Requirements |
UL 60335-2-3 | Standard for Safety of Household and Similar Electrical Appliances, Part 2: Particular Requirements for Electric Irons |
UL 60335-2-8 | Household and Similar Electrical Appliances, Part 2: Particular Requirements for Shavers, Hair Clippers, and Similar Appliances |
UL 60335-2-34 | Household and Similar Electrical Appliances, Part 2, Particular Requirements for Motor Compressors |
UL 60601-1 | Medical Electrical Equipment, Part 1: General Requirements for Safety |
UL 60745-1 | Hand-Held Motor-Operated Electric Tools–Safety–Part 1: General |
UL 60745-2-2 | Hand-Held Motor-Operated Electric Tools – Safety – Part 2-2: Particular Requirements for Screwdrivers and Impact Wrenches |
UL 60745-2-4 | Hand-Held Motor-Operated Electric Tools – Safety – Part 2-4: Particular Requirements for Sanders and Polishers Other Than Disk Type |
UL 60745-2-6 | Hand-Held Motor-Operated Electric Tools – Safety – Part 2-6: Particular Requirements for Hammers |
UL 60745-2-8 | Hand-Held Motor-Operated Electric Tools – Safety – Part 2-8: Particular Requirements for Shears and Nibblers |
UL 60745-2-9 | Hand-Held Motor-Operated Electric Tools – Safety – Part 2-9: Particular Requirements for Tappers |
UL 60745-2-11 | Hand-Held Motor-Operated Electric Tools – Safety – Part 2-11: Particular Requirements for Reciprocating Saws |
UL 60745-2-12 | Hand-Held Motor-Operated Electric Tools – Safety – Part 2-12: Particular Requirements For Concrete Vibrators |
UL 60745-2-16 | Hand-Held Motor-Operated Electric Tools – Safety – Part 2-16: Particular Requirements for Tackers |
UL 60745-2-33 | Hand-Held Motor-Operated Electric Tools – Safety – Part 2-20: Particular Requirements For Band Saws |
UL 60745-2-34 | Hand-Held Motor-Operated Electric Tools – Safety – Part 2-18: Particular Requirements For Strapping Tools |
UL 60950-1 | Information Technology Equipment – Safety – Part 1: General Requirements |
UL 61010-1 | Electrical Equipment For Measurement, Control, and Laboratory Use; Part 1: General Requirements |
Restrictions/Limitations on Recognition Granted: | |
Note: * Testing and certification of products under this test standard is limited to Class I locations. Explosion testing is also limited to current test chamber capabilities. | |