Standards Under The NRTL Program
Standards Under The NRTL Program
MET currently has OSHA approval to test and certify to over 180 product categories. The table below details the standards that apply.
| Programs: | |
| 2. Acceptance of testing data from independent organizations, other than NRTLs. | |
| 3. Acceptance of product evaluations from independent organizations, other than NRTLs. | |
| 4. Acceptance of witnessed testing data. | |
| 5. Acceptance of testing data from non-independent organizations. | |
| 6. Acceptance of evaluation data from non-independent organizations (requiring NRTL review prior to marketing). | |
| 7. Acceptance of continued certification following minor modifications by the client. | |
| 8. Acceptance of product evaluations from organizations that function as part of the International Electrotechnical Commission Certification Body (IEC-CB) Scheme. | |
| 9. Acceptance of services other than testing or evaluation performed by subcontractors or agents. | |
| Product Standards: | |
| ANSI A17.5 | Elevator and Escalator Electrical Equipment |
| ANSI C12.1 | Code for Electricity Meters |
| ANSI/IEEE C57.13 | Terminology and Test Code for Instrument Transformers |
| ANSI/UL 5 | Surface Metal Raceways and Fittings |
| UL 5A | Nonmettalic Surface Raceways and Fittings |
| ANSI/ISA 12.12.01 | Nonincendive Electrical Equipment for Use in Class I & II, Division 2 & Class III, Divisions I & 2 Hazardous |
| ANSI/UL 22 | Electric Amusement Machines |
| UL 45 | Portable Electric Tools |
| UL 48 | Electric Signs |
| ANSI/UL 50 | Enclosures for Electrical Equipment |
| ANSI/UL 65 | Electric Wired Cabinets |
| ANSI/UL 73 | Electric Motor-Operated Appliances |
| UL 82 | Electric Gardening Appliances |
| ANSI/UL 122 | Electric Photographic Equipment |
| ANSI/UL 130 | Electric Heating Pads |
| ANSI/UL 153 | Portable Electric Lamps |
| UL 183 | Manufactured Wiring Systems |
| ANSI/UL 187 | X-Ray Equipment |
| ANSI/UL 197 | Commercial Electric Cooking Appliances |
| ANSI/UL 201 | Garage Equipment |
| ANSI/UL 231 | Electrical Power Outlets |
| UL 234 | Low Voltage Lighting Fixtures for Use in Recreational Vehicles |
| UL 244A | Solid State Controls for Appliances |
| UL 250 | Household Refrigerators and Freezers |
| UL 291 | Automated Teller Systems |
| UL 294 | Access Control System Units |
| UL 325 | Door, Drapery, Gate, Louver and Window Operator and Systems |
| UL 355 | Cord Reels |
| UL 399 | Drinking Water Coolers |
| UL 412 | Refrigeration Unit Coolers |
| UL 416 | Refrigerated Medical Equipment |
| UL 427 | Refrigerating Units |
| UL 430 | Waste Disposers |
| UL 458 | Power Converters/Inverters and Power Converter/Inverter Systems for Land Vehicles and Marine Crafts |
| UL 466 | Electric Scales |
| ANSI/UL 469 | Musical Instruments and Accessories |
| ANSI/UL 471 | Commercial Refrigerators and Freezers |
| UL 474 | Dehumidifiers |
| ANSI/UL 482 | Portable Sun/Heat Lamps |
| ANSI/UL 484 | Room Air Conditioners |
| ANSI/UL 498A | Current Taps and Adapters |
| ANSI/UL 499 | Electric Heating Appliances |
| UL 506 | Specialty Transformers |
| ANSI/UL 507 | Electric Fans |
| ANSI/UL 508 | Electric Industrial Control Equipment |
| UL 508A | Industrial Control Panels |
| UL 508C | Power Conversion Equipment |
| ANSI/UL 514A | Metallic Outlet Boxes, Electrical |
| UL 541 | Refrigerated Vending Machines |
| UL 544 | Electric Medical and Dental Equipment |
| UL 561 | Floor-Finishing Machines |
| UL 563 | Ice Makers |
| UL 588 | Seasonal and Holiday Decorative Products |
| UL 664 | Commercial Dry-Cleaning Machines (Type IV) |
| ANSI/UL 676 | Underwater Lighting Fixtures |
| ANSI/UL 705 | Power Ventilators |
| UL 745-1 | Portable Electric Tools |
| UL 745-2-1 | Particular Requirements of Drills |
| UL 745-2-3 | Particular Requirements for Grinders, Polishers, and Disk-Type Sanders |
| UL 745-2-5 | Particular Requirements for Circular Saws and Circular Knives |
| UL 745-2-14 | Particular Requirements for Planers |
| UL 745-2-17 | Particular Requirements for Routers and Trimmers |
| UL 745-2-31 | Particular Requirements for Diamond Core Drills |
| UL 745-2-32 | Particular Requirements for Magnetic Drill Presses |
| UL 745-2-35 | Particular Requirements for Drain Cleaners |
| UL 745-2-36 | Particular Requirements for Hand Motor Tools |
| UL 745-2-37 | Particular Requirements for Plate Jointers |
| UL 749 | Household Dishwashers |
| ANSI/UL 751 | Vending Machines |
| UL 756 | Coin and Currency Changers and Actuaters |
| UL 763 | Motor-Operated Commercial Food Preparing Machines |
| UL 775 | Graphic Arts Equipment |
| UL 778 | Motor-Operated Water Pumps |
| ANSI/UL 813 | Commercial Audio Equipment |
| UL 826 | Household Electric Clocks |
| UL 858 | Household Electric Ranges |
| ANSI/UL 859 | Personal Grooming Appliances |
| UL 867 | Electrostatic Air Cleaners |
| UL 869A | Standard for Service Equipment |
| ANSI/UL 913 | Intrinsically Safe Apparatus and Associated apparatus for Use in Class I, II, and III, Division 1, Hazardous Locations |
| UL 916 | Energy Management Equipment |
| UL 917 | Clock-Operated Switches |
| ANSI/UL 923 | Microwave Cooking Appliances |
| UL 924 | Emergency Lighting and Power Equipment |
| UL 935 | Fluorescent-Lamp Ballasts |
| UL 961 | Electric Hobby and Sports Equipment |
| UL 963 | Sealing, Wrapping, and Marking Equipment |
| ANSI/UL 982 | Motor-Operated Household Food Preparing Machines |
| UL 983 | Surveillance Cameras Units |
| UL 987 | Stationary and Fixed Electric Tools |
| UL 998 | Humidifiers |
| UL 1008 | Transfer Switch |
| ANSI/UL 1012 | Power Supplies |
| ANSI/UL 1017 | Vacuum Cleaning Machines and Blower Cleaners |
| ANSI/UL 1018 | Electric Aquarium Equipment |
| UL 1026 | Electric Household Cooking and Food Serving Appliances |
| UL 1028 | Hair Clipping and Shaving Appliances |
| ANSI/UL 1042 | Electric Baseboard Heating Equipment |
| ANSI/UL 1054 | Special-Use Switches |
| ANSI/UL 1069 | Hospital Signaling and Nurse-Call System |
| UL 1081 | Swimming Pool Pumps, Filters and Chlorinators |
| UL 1082 | Household Electric Coffee Makers and Brewing-Type Appliances |
| UL 1083 | Household Electric Skillets and Frying-Type Appliances |
| UL 1086 | Household Trash Compactors |
| UL 1090 | Electric Snow Movers |
| ANSI/UL 1203* | Explosion-Proof and Dust-Ignition-Proof Electrical Equipment for Use in Hazardous (Classified) Locations |
| ANSI/UL 1230 | Amateur Movie Lights |
| UL 1236 | Battery Chargers for Charging Engine-Starter Batteries |
| UL 1244 | Electrical and Electronic Measuring and Testing Equipment |
| UL 1248 | Engine-Generator Assemblies for Use in Recreational Vehicles |
| UL 1261 | Electric Water Heaters for Pools and Tubs |
| UL 1278 | Movable and Wall or Ceiling Hung Electric Room Heaters |
| ANSI/UL 1310 | Direct Plug-In Transformer Units |
| UL 1363 | Relocatable Power Taps |
| ANSI/UL 1411 | Transformers and Motor Transformers for Use in Audio-, Radio-, and Television-Type Appliances |
| UL 1419 | Professional Video and Audio Equipment |
| UL 1431 | Personal Hygiene and Health Care Appliances |
| UL 1433 | Control Centers for Changing Message Type Electric Signs |
| UL 1447 | Electric Lawn Mowers |
| UL 1448 | Electric Hedge Trimmers |
| UL 1449 | Transient Voltage Surge Suppressors |
| UL 1450 | Motor-Operated Air Compressors, Vacuum Pumps and Painting Equipment |
| UL 1492 | Audio-Video Products and Accessories |
| UL 1559 | Insect-Control Equipment – Electrocution Type |
| UL 1563 | Electric Spas, Equipment Assemblies, and Associated Equipment |
| UL 1564 | Industrial Battery Chargers |
| ANSI/UL 1573 | Stage and Studio Lighting Units |
| UL 1574 | Track Lighting Systems |
| UL 1594 | Sewing and Cutting Machines |
| UL 1598 | Luminaries |
| ANSI/UL 1638 | Visual Signaling Appliances–Private Mode Emergency and General Utility Signaling |
| UL 1640 | Portable Power-Distribution Equipment |
| ANSI/UL 1647 | Motor-Operated Massage and Exercise Machines |
| UL 1662 | Electric Chain Saws |
| UL 1727 | Commercial Electric Personal Grooming Appliances |
| UL 1740 | Industrial Robots and Robotic Equipment |
| UL 1741 | Inverters, Converters, Controllers and Interconnection System Equipment for Use With Distributed Energy Resources |
| UL 1776 | High-Pressure Cleaning Machines |
| UL 1778 | Uninterruptible Power Supply Equipment |
| UL 1786 | Nightlights |
| UL 1795* | Hydromassage Bathtubs |
| UL 1838 | Low Voltage Landscape Lighting Systems |
| UL 1863 | Communication Circuit Accessories |
| UL 1951 | Electric Plumbing Accessories |
| UL 1993 | Self-Ballasted Lamps and Lamp Adapters |
| UL 1994 | Luminous Egress Path Marking Systems |
| UL 1995 | Heating and Cooling Equipment |
| UL 1996 | Electric Duct Heater |
| UL 2021 | Fixed and Location Dedicated Electric Room Heaters |
| UL 2044 | Commercial Closed Circuit Television Equipment |
| UL 2089 | Vehicle Battery Adapters |
| UL 2157 | Electric Clothes Washing Machines and Extractors |
| UL 2158 | Electric Clothes Dryers |
| UL 2161 | Neon Transformers and Power Supplies |
| UL 5085-1 | Low Voltage Transformers–Part 1: General Requirements |
| UL 5085-3 | Low Voltage Transformers–Part 3: Class 2 and Class 3 Transformers |
| UL 6500 | Audio/Visual and Musical Instrument Apparatus for Household, Commercial, and Similar General Use |
| UL 60065 | Audio, Video and Similar Electronic Apparatus |
| UL 60335-1 | Safety of Household and Similar Electrical Appliances, Part 1, General Requirements |
| UL 60335-2-3 | Standard for Safety of Household and Similar Electrical Appliances, Part 2: Particular Requirements for Electric Irons |
| UL 60335-2-8 | Household and Similar Electrical Appliances, Part 2: Particular Requirements for Shavers, Hair Clippers, and Similar Appliances |
| UL 60335-2-34 | Household and Similar Electrical Appliances, Part 2, Particular Requirements for Motor Compressors |
| UL 60601-1 | Medical Electrical Equipment, Part 1: General Requirements for Safety |
| UL 60745-1 | Hand-Held Motor-Operated Electric Tools–Safety–Part 1: General |
| UL 60745-2-2 | Hand-Held Motor-Operated Electric Tools – Safety – Part 2-2: Particular Requirements for Screwdrivers and Impact Wrenches |
| UL 60745-2-4 | Hand-Held Motor-Operated Electric Tools – Safety – Part 2-4: Particular Requirements for Sanders and Polishers Other Than Disk Type |
| UL 60745-2-6 | Hand-Held Motor-Operated Electric Tools – Safety – Part 2-6: Particular Requirements for Hammers |
| UL 60745-2-8 | Hand-Held Motor-Operated Electric Tools – Safety – Part 2-8: Particular Requirements for Shears and Nibblers |
| UL 60745-2-9 | Hand-Held Motor-Operated Electric Tools – Safety – Part 2-9: Particular Requirements for Tappers |
| UL 60745-2-11 | Hand-Held Motor-Operated Electric Tools – Safety – Part 2-11: Particular Requirements for Reciprocating Saws |
| UL 60745-2-12 | Hand-Held Motor-Operated Electric Tools – Safety – Part 2-12: Particular Requirements For Concrete Vibrators |
| UL 60745-2-16 | Hand-Held Motor-Operated Electric Tools – Safety – Part 2-16: Particular Requirements for Tackers |
| UL 60745-2-33 | Hand-Held Motor-Operated Electric Tools – Safety – Part 2-20: Particular Requirements For Band Saws |
| UL 60745-2-34 | Hand-Held Motor-Operated Electric Tools – Safety – Part 2-18: Particular Requirements For Strapping Tools |
| UL 60950-1 | Information Technology Equipment – Safety – Part 1: General Requirements |
| UL 61010-1 | Electrical Equipment For Measurement, Control, and Laboratory Use; Part 1: General Requirements |
| Restrictions/Limitations on Recognition Granted: | |
| Note: * Testing and certification of products under this test standard is limited to Class I locations. Explosion testing is also limited to current test chamber capabilities. | |
