Blog
Electrical/Electronic Regulatory Requirements for Top 5 Middle East Economies
Driven by vast petroleum resources, many parts of the Middle East are growing rapidly. Following are the region’s biggest economies (listed largest to smallest), and electrical/electronic regulatory compliance issues for each. Turkey Boasting the largest economy in the Middle East, Turkey is being considered for European Union membership and the EU CE Mark is accepted... Read More
Pre-Compliance EMC Testing Saves Cost and Accelerates Speed to Market
You have designed and built a great new electrical product that meets market demands and trumps competitive offerings. You are confident that it doesn’t radiate much energy and is not susceptible to outside interference. Yet when you do final EMC testing, your product fails. This is the nightmare scenario for product designers. Unit redesign and... Read More
New MIL-STD-461G Draft for Military EMI Control Is Released
After a long wait, the draft of MIL-STD-461G has been published. MIL-STD-461 is the U.S. Department of Defense’s (DoD) primary standard for the control of electromagnetic interference (EMI) characteristics of subsystems and equipment. Draft G was prepared by a committee consisting of representatives of the Army, Air Force, Navy, other DoD agencies, and industry. MET... Read More
Marijuana Farms Skirt Laws – EMC & Product Safety Laws, That Is
According to a recent article by a San Francisco-area police officer, indoor marijuana grows are proliferating and many of them are illegal. Due to their frequent use of uncertified equipment that is manufactured overseas with little to no regulatory oversight, there has been a significant amount of radio frequency interference (RFI) that leaves these operations... Read More
RSS-102, Issue 5 Now in Force for RF Exposure Compliance in Canada
Last month, Industry Canada published Radio Standards Specification RSS-102, Issue 5, Radio Frequency (RF) Exposure Compliance of Radiocommunication Apparatus (All Frequency Bands), which sets out the requirements and measurement techniques used to evaluate radio frequency (RF) exposure compliance of radio equipment designed to be used within the vicinity of the human body. RSS 102, Issue... Read More
FCC Incorporates ANSI C63.4-2014 and ANSI C63.10-2013 into Rules for Unintentional and Intentional Radiators
On December 30, 2014, the U.S. Federal Communication Commission (FCC) issued a Report and Order in ET Docket No. 13-44, updating the Commission’s radiofrequency (RF) equipment authorization program to expand the use of FCC-recognized Telecommunications Certification Bodies (TCBs) like MET Labs as a faster and less expensive way to certify equipment. The new rules outsource... Read More
Top 12 Facts about CE Marking of Electrical and Electronic Equipment
Placed on many categories of products, CE Marking is mandatory for machinery, electrical and electronic equipment, medical devices, hazardous location equipment, and other products. So if you are looking to sell an electronics product in the EU, you will need to apply a CE mark. Here’s a Top 12 list of interesting facts about CE... Read More
New Standards Developed for Wi-Fi Alliance Certification
With Wi-Fi device shipments now in excess of 10 billion, the Wi-Fi Alliance® continues to innovate, developing new certification programs to support new technologies. A list of current work areas can be found here. To highlight a few: Wi-Fi Aware™ – a power-efficient proximity-based technology that identifies nearby users without connecting to the Internet (Certification... Read More
ETSI EN 300 328 Version 1.9.1 Contains Important Updates to V1.8.1
Right on the heels of EN 300 328 Version 1.8.1 becoming effective on December 31, 2014, Version 1.9.1 is expected to be published this year. Since there were significant changes between ETSI’s V1.7.1 and V1.8.1, it’s natural that electronics manufacturers are wondering what changes are in store for V1.9.1. What is anticipated to become final... Read More
Electric Sign Safety Governed by UL 48 and NEC Article 600
The National Electrical Code (NEC) Article 600 and UL 48 Standard for Safety for Electric Signs are used to evaluate the field installation and construction of electric signs in the U.S. In Canada, the relevant guidelines are the Canadian Electrical Code (CEC) and CSA 22.2 No. 207. All signs that are electrically operated and/or electrically... Read More
